Pumpkin With Print-In-Place Legs

$2.89

Print-in-Place Standing Pumpkin Halloween

This cute but O-So-Scary pumpkin has a surprise for you when printed! Pull it off the buildplate and it can stand on it’s own legs!

Comes with or without eyes and (soon) versions for multicolor single-extruder (with assembly) or multicolor dual-extruder 2 and 4 color.

Download STL

Print-in-Place Standing Pumpkin Halloween

This cute but O-So-Scary pumpkin has a surprise for you when printed! Pull it off the buildplate and it can stand on it’s own legs!

Comes with or without eyes and (soon) versions for multicolor single-extruder (with assembly) or multicolor dual-extruder 2 and 4 color.

Print-in-Place Standing Pumpkin Halloween

This cute but O-So-Scary pumpkin has a surprise for you when printed! Pull it off the buildplate and it can stand on it’s own legs!

Comes with or without eyes and (soon) versions for multicolor single-extruder (with assembly) or multicolor dual-extruder 2 and 4 color.

This is the same model found on my Cults3D page here. Inspired by the Zou Ghost by Tower of Creation, I’ve designed a complementary model that sits (stands) perfectly next to the Zou Ghost.

©3D Print Tech Design - You may sell finished 3D-prints of this model to your friends, family and commercially (but the STLs are not allowed to share/resell). If you sell a lot and make good money, please consider donating (as a form of kickback) to me as a designer (www.antonmansson.com/donate) and to Tower-of-Creation that I was inspired by when creating this model.

Recommended Print settings for best result:

  • Roughly 1,5 hours print time at 60mm/s;

  • Layer Height: 0.2mm

  • Nozzle Diameter: 0.4mm

  • Wall thickness (0.8mm / 2 walls)

  • Infill: 15% Grid/simple

  • Temperature: Follow your brands recommendations

  • No Support - Print in place kinetics with kind tolerances.

Changing settings may affect center of gravity and how well the pumpkin stands by itself.